Thermal Insulator
General product information
Description :Red Garden Paint's Insulator is a water based protective coating for thermal insulation * provides a highly durable tough abrasion resistance * has excellent adhesion to canvas and other thermal insulation *ace Preparation And Application :
All surface should be clean, dry and free from dust, grease and other foreign *y an even coat of Insulator on to canvas or other lagging fabric. Wrap lagging fabric arround pipe covering as a protective jacket. Ensure the ends are lapped to provide a definite seal. Apply a second coat of Insulator over jacket to protect pipe covering. Canvas can also be dipped directly where saturation and shrinkage are required.
Precaution :
Do not thin-Do not apply in an excessive temperature-Do not permit installation to go below freezing within the first 36 hours after *n tools and adhesive smears with * :
Insulator is used for bonding and coating wide variety of thermal insulating material on air conditioning ducts, cold water pipes and vessels. Hot water pipes should be wrapped with cloth dipped in Insulator after complete insulation by basic * be applied on Canvas Coating-Expanded polystyrene-Polyurethane foam-Plastic foam-Glass Clothes-Glasswool, Rockwool.
Advantages :
High strength-Durable-Fungus resistant-Water resistant-Crack resistant-Abrasion and fire resistant-Non toxic, non flammable-Economical to use.
Technical Data:
Colour
White or as ordered.
Consistency Moderately viscous liquid.
Specific Gravity 1.40 + 0.02
Solid Content 60 +/-1%
Application Brush, Spray or Roller
Flash Point None-water based.
Service Temp. 15 ° C to 50 ° C
Strength
Formulated to meet requirement of MIL-A-3316 B Class 1 : Amendment 2, for wet and dry Strength.
Flammability Non-Flammable (wet state) Not photo chemical reactive.
Water Resistance Formulated to meet requirement of MIL-A-3316
B Class-1, amendment 2.
Water Vapour transmission 1.1 perms 10 mils DFT
PH 8
Bonding Time 45 minutes
Drying Time 2 hours touch 8 hour complete depends upon weather conditions.
Coverage 4-5 /Litre depending on texture of *ing 16-20 Kg Drum
Storage + Shelf Life When stored in original, unopened container in a Cool, dry place, has shelf life of 12 months.
Note: Recommended spreading rate per liter based upon minimum recommended dry film thickness per coat. No allowance is made for material loss during application.