Red Garden Paints

General product information

Description:

Red Garden Paint's Waterproof is a liquid elastomeric, one-pack, acrylic copolymer based coating with excellent weather resistance. It seals hairline cracks, stops seepage and forms an impermeable film which gives long life flexibility and ideally suited for use in areas with extreme climatic conditions.

Primary use:

Waterproof is a vapour permeable, seamless liquid compound which dries to give a flexible, tough, solar reflective, waterproof *ace Preparation And Application:

Ensure that all dust, dirt, and foreign matter is removed from the roof surface. All cracks should be properly repaired with acrylic filler. Prime the surface by diluting Waterproof with 15-20% *rproof may be applied by brush, roller or spray, depending on the size of the area to be *y two to three coats of Waterproof embedding glass fibre scrim in areas which require reinforcement. Allow material to dry between * at right angles to the first. Do not apply if there is likelihood of rain as Waterproof is not resistant to rain until fully dry. Do not brush like a paint. Tools should be washed in * be applied on Lightweight Concrete screed, Asbestos-Cement. Asphalt, Built up felt, Slate or tiles and Timber.

Advantages:

Tough, elastic, Solar reflective, Weatherproof, Permeable, seamless, withstands movement of roof, Good adhesion to most substrates, economical and easy to use.

Technical Data:

Colours Available
White, Ash White, or as ordered.
Consistency Moderately viscous liquid.
Flash Point None-water based.
Specific Gravity 1.2+/-0.05 at 20°C
Thickness 0.750 mm at 1 / Liter / Final Coat 3 Coats recommended.
Application
Brush, Spray, Roller
Finish Tough, seamless, semi gloss, Elastic film.
Solid 62+/-1%
Service Temperature 10°C to 12°C
Machanics
Elongation at break Above 300% ASTM-D412-75
Bend Strength Passed 1/16th in Cylindrical mandrel test.
Impact Strength Passed 20 lbs impact and gardener test at 360 bending.
Tensile Strength

Dry 4 N/ ASTM-D412 Wet 1.4 N/M ASTM-D 412 60C 1.4 N/M ASTM-D 412
Water Coated concrete block does not show measurable Water absorption. Prolonged immersion in Water does not effect the cured *rproof shows excellent resistance to the effect of Ponded *eability
1.8 gms per m per 24 hours at 25°C with 75% humidity.
Storage Stability Eight to Ten Months when stored properly in Original sealed containers in a dry place.
Packing 20 Kg. 5Kg. or Project Packing




Note: Recommended spreading rate per liter based upon minimum recommended dry film thickness per coat. No allowance is made for material loss during application.