Supplier profile
Contact details
Our principle technology is focused around the creation of PCE Super plasticiser which is a new polycarboxylate based superplasticiser powder. It is a specialised polymer designed mainly for use in cementitious applications and we have the ability to supply over 5,000 tonnes per annum. We offer 4 versions of this powder, the principle difference being the length of the polymer backbone which leads to different levels of slump retention and 3 Level of Liquid PCE Super Plasticiser.
Particular advantages include:
Technical Benefits:
-Increased early strength development
-Increased ultimate strength & durability due to reduced permeability
-Shrinkage reduction
-Superior slump retention affords longer workability if required
-Improved appearance due to minimal air entrapment
-Superior flow ...characteristics in self-levelling floor screeds
Commercial/Practical Benefits:
-Excellent cost savings over conventional powder superplasticisers
-Cement economies, i.e. the same strength can be achieved with less cement
-Reduced energy needed for compacting machinery
-Chloride-free
-Formaldehyde-free
A typical dosage range would be between 0.05 0.5% by weight of dry cement and, as a rule of thumb, it is used at 1/3rd to a 1/4th the dose of melamine powders .
This can replace napthalene Formaldehyde Condensate,Sodium ligno sulphonate and Melamine Formaldehyde condensate.
This product can be used for following application.
Self leveling Screeds,
Tile grout,
Gypsum Board,
Water Reducing Admixture.
Mottar
Etc Read more
Particular advantages include:
Technical Benefits:
-Increased early strength development
-Increased ultimate strength & durability due to reduced permeability
-Shrinkage reduction
-Superior slump retention affords longer workability if required
-Improved appearance due to minimal air entrapment
-Superior flow ...characteristics in self-levelling floor screeds
Commercial/Practical Benefits:
-Excellent cost savings over conventional powder superplasticisers
-Cement economies, i.e. the same strength can be achieved with less cement
-Reduced energy needed for compacting machinery
-Chloride-free
-Formaldehyde-free
A typical dosage range would be between 0.05 0.5% by weight of dry cement and, as a rule of thumb, it is used at 1/3rd to a 1/4th the dose of melamine powders .
This can replace napthalene Formaldehyde Condensate,Sodium ligno sulphonate and Melamine Formaldehyde condensate.
This product can be used for following application.
Self leveling Screeds,
Tile grout,
Gypsum Board,
Water Reducing Admixture.
Mottar
Etc Read more
- AddressWaterfall Road
- Zip/Postal codeN11 1LH
- City/RegionLondon
- CountryUnited Kingdom
- Phonenumber+44-79-35155674
- Emailaddress
- Homepage
Type
- Other supplier products
- Metal & Steel Products
- Chemicals and Super Plasticiser
Category
- Distribution
- Manufacturing
